A special session is a group of 6 papers (or multiple of 6), organized on the initiative of any volunteer proposing NO MORE than 2 papers inside. Special session topics must be in areas consistent with those of the conference.
In order to avoid that Special Sessions tend to draw papers from Regular Tracks, the Special Sessions on Topics not enough specific and too general will be rejected.
List of Accepted Special Sessions
The following is list of accepted Special Sessions and Call for Papers.
You can upload provisional Special Session full papers by specifying the corresponding session in the pull down menu at IECON2015 manuscript submission system.
Notice that the deadline of full paper is the same as of the regular papers.
No | Special Session Title / Organizer | CFP |
---|---|---|
SS1 |
Big Data Analytics for Industrial Informatics Elizabeth Chang, Paulo Leitao, Tharam Dillon, Farookh Khadeer Hussain |
|
SS2 |
Cyber Physical Systems (CPS) for transportation, logistics and asset management Elizabeth Chang, Tharam Dillon, Armando Colombo |
|
SS3 |
Digital Ecosystems and Smart Technologies Elizabeth Chang, Veleriy Vyatkin, Farookh Hussain |
|
SS4 |
Trust, Security, Privacy and Risk in Industrial Informatics Elizabeth Chang, Omar Hussain, Naeem Janjua, Farookh Hussain |
|
SS5 |
ROBOTICS IN THE MODERN AGE Hitoshi Kino, Tomonori Kato, Kenji Tahara |
|
SS6 |
Wireless Power Transfer Zhen Zhang, Chunhua Liu |
|
SS7 |
Advancing Electric Vehicle Technologies Chunhua Liu, Zhen Zhang |
|
SS8 |
Induction Heating Systems Óscar Lucía, Claudio Carretero |
|
SS9 |
Biomimetics and Intelligent Robotics Maki K. Habib, Keigo Watanabe, Fusaomi Nagata |
|
SS10 |
Information Technologies for Smart Grids Thomas Strasser, Sebastian Rohjans |
|
SS11 |
Real-time Simulation and Hardware-in-the-Loop Validation Methods for Power and Energy Systems Georg Lauss, Thomas Strasser |
|
SS12 |
Smart Sensors for the Future “Internet of Things” Zhichao Tan, Stoyan Nihtianov, Ridha Ben-Mrad, Antonio Luque |
|
SS13 |
Signal and Image Processing and Pattern Recognition Techniques for Electric Machine and Power Electronics Fault Diagnosis and Prognosis Jose Antonino-Daviu, Hubert Razik |
|
SS14 |
New methodologies in electrical and electronic engineering education Jose Antonino-Daviu, Larisa Dunai Dunai |
|
SS15 |
Fault Detection, Diagnostics and Prognostics in Electromechanical Devices Omid Geramifard, Le Tung, Jian-Xin Xu |
|
SS16 |
Multiphase Electric Machines for Generation and Motor Applications Emil Levi, Federico Barrero |
|
SS17 |
Biomedical Applications of Industrial Electronics Carlo Cecati, Toshio Fukuda, Óscar Lucía |
|
SS18 |
CONTROL AND FILTERING FOR DISTRIBUTED NETWORKED SYSTEMS Qing-Long Han, Chen Peng |
|
SS19 |
ADVANCED CONTROL OF ROBOTIC SYSTEMS Michael Ruderman, Makoto Iwasaki |
|
SS20 |
MULTIFUNCTIONAL HIGH POWER FACTOR RECTIFIERS Hadi Y. Kanaan, Kamal Al-Haddad |
|
SS21 |
MULTILEVEL CONVERTERS FOR RENEWABLE ENERGY SYSTEMS Hadi Y. Kanaan, Kamal Al-Haddad |
|
SS22 |
ADVANCED POWER ELECTRONICS FOR POWER QUALITY IMPROVEMENT IN DISTRIBUTED SYSTEMS Hadi Y. Kanaan, Kamal Al-Haddad |
|
SS23 |
Vision Sensing and Data Processing for Human Assistive Systems Sota Shimizu, Naoki Oda, Toshiyuki Murakami |
|
SS24 |
Multilevel Converter Marcelo A. Perez, Sergio Vazquez |
|
SS25 |
Conversion and Control of Photovoltaic Energy Systems Samir Kouro, Christian Rojas |
|
SS26 |
Optimized real-time control strategies of power electronics for embedded hybrid energy systems Fei Gao, Alexandre De Bernardinis |
|
SS27 |
MATRIX CONVERTERS Marco Rivera, José Rodríguez, Patrick Wheeler, Haitham Abu-Rub |
|
SS28 |
Advanced Motion Control for Mechatronic Systems Hiroshi Fujimoto, Makoto Iwasaki, Roberto Oboe, Toshiaki Tsuji |
|
SS29 |
Engineering Paradigms for Automated Facilities Matthias Foehr, Tobias Jäger, Paulo Leitão |
|
SS30 |
RECENT DEVELOPMENTS ON TIME-DELAY SYSTEMS AND THEIR APPLICATIONS Qing-Long Han, Yutaka Uchimura |
|
SS31 |
ELECTRICAL MACHINES AND DRIVES FOR ELECTRIC AND HYBRID VEHICLES Christopher H. T. Lee, T. W. Ching |
|
SS32 |
RENWEABLE ENERGY HARVESTING TECHNIQUE FOR FUTURE ENERGY SYSTEMS Wenlong Li, T. W. Ching |
|
SS33 |
Intelligent Robotic Control and Motion Planning Xu Jianxin, Ren Qinyuan |
|
SS34 |
Vehicle Intelligence for Proactive Assistance Takahiro Wada, Takashi Bando, Tadahiro Taniguchi |
|
SS35 |
Bio-signal and Multimedia Signal Processing Nozomu Hamada, Yasue Mitsukura |
|
SS36 |
Power electronic converters for fuel cell electric transportation Arnaud GAILLARD, Daniela CHRENKO |
|
SS37 |
Human Support and Monitoring Technology on Human Factors Kang-Hyun JO, Hiroshi HASHIMOTO, Sho YOKOTA, Satoshi SUZUKI |
|
SS38 |
Smart Transparent Actuation Systems Kyougnchul Kong, Hiroshi Fujimoto |
|
SS39 |
New trends in Education regarding Cyber-Physical Systems and Industrial Agents Armando Walter Colombo, Paulo Leitão, João Martins |
|
SS40 |
Wireless and Cloud Systems for Industrial Sensing Applications Mikael Gidlund, Kim Fung Tsang, Gerhard P. Hancke |
|
SS41 |
Real-World Haptics Based on Motion Control Technology Seiichiro Katsura, Kiyoshi Ohishi, Yasutaka Fujimoto |
|
SS42 |
FAULT DIAGNOSIS AND FAULT TOLERANCE IN POWER ELECTRONICS AND DRIVES Chiara Boccaletti, António João Marques Cardoso |
|
SS43 |
Building Automation –Solving the Complexity Challenges Jan Haase, Gerhard Zucker |
|
SS44 |
Static and Dynamic Wireless Charging for Electric Transportation Giuseppe Buja, Akshay Kumar Rathore, Kishore Naik Mude |
|
SS45 |
RESONANT POWER CONVERTERS TOPOLOGIES, CONTROL TECHNIQUES AND APPLICATIONS Maria Teresa Outeiro, Giuseppe Buja |
|
SS46 |
Information and Communication Technology for Smart Energy Application Palensky Peter, Jan Haase, Hiroaki Nishi |
|
SS47 |
Nonlinear Control Techniques for Power System and Renewable Energy Applications Ahmed Al-Durra, S.M. Muyeen, M. E. H. Benbouzid |
Organizer Instructions
Any potential organizer (or group of organizers: no more than 2) has to complete the following tasks:
- provide Special Sessions Co-Chairs with a provisional title of the special session;
- send a "Call for Papers" dedicated to that special session to Special Sessions Co-Chairs (one PDF page as the one provided in the conference website): Deadline March 15, 2015;
- send a potential list of authors to be invited to submit a paper;
- send a list of potential reviewers (at least 3 reviewers per paper) to facilitate the review process
If less than 6 papers will be submitted before the end of the deadline, the submitted papers will be moved to regular tracks to be reviewed as regular contributions.
Special Sessions Co-Chairs
- Prof. Makoto Iwasaki:
- Prof. Roberto Oboe:
"Call for Papers" template | Template |
---|---|
Deadline for Special Session proposal submission | March 15, 2015 |
Deadline for uploading provisional Special Session full papers | SAME AS REGULAR PAPERS - April 15, 2015 |